No. 25 Penhouët By Grisette - Version 2

A fitted dress with an open neckline and darts around the waist and hip.

Fabric choice:

Knitted or woven fabric with stretch between 4-7 %. This pattern has no zipper so stretchy fabric is important. Suggested types of fabric are; heavy jersey, Ponte, French terry, be-stretch or woven fabric with comfort stretch

Find Your Size:

Take your measurement according to the measurement chart. Choose the size closest to your measurement print measurement chart here

Fitting:

We recommend that you always make a muslin before you cut the fashion fabric to ensure your finished style will fit you perfectly. Remember to use a simular fabric for your muslin.

Cutting Fabric

On each pattern piece, you will find a capital letter. On the cutting layout plan, you will find the same capital letters so that you can easily see which pattern pieces to use for the view you have chosen.

YOU WILL NEED THE FOLLOWING PATTERN PIECES:

A, B, C, D, E

print sewing instructions

Sewing

NOTE!

The Pattern Has 1 Cm Seam Allowances Included Unless Otherwise noted!

Cut all your pieces in fabric as needed.

2. Sew the four darts on the front piece (A) and the two darts on the back (B) right sides together. Fold according to the notches and markings.

3. Press the darts on the back (B) upwards, and the darts on the front (A) in opposite directions from each other.

4. With right sides together, align the waist edges of the lower back (C) and the top back. (B) matching the notch at the seam. Pin and sew.

5. Overlock

The seam on the back piece.
The side seams of front and back – fold the seam of the back downwards.
The shoulder seams.
The centre back seams separately. See here how you overlock the angle at the vent.
The inner seams of the sleeves.

6. Sew the centre back seam and the top of the vent, right sides together. Press seam open

7. Sew the shoulder seams, right sides together. Press seams open.

Sew the neckband

8. Sew the neckband (E), right sides together at the v-shaped ends.

9. Fold the neckband on the long edge, wrong sides together and press.

10. Press a small piece of interfacing to the wrong side of the v of the neckline on the body, not the neckband.

11. Mark the sewing line in the v on both the dress and the neckband.

12. Pin the neckband to the neckline at one side of the v, right sides together.

13. Sew down approx. 2.5 cm to the centre of the v and backstitch.

14. Cut the v, ONLY cut in the dress, then you can turn the neckband and sew the other side of the v.

15. Now sew the rest of the neckline. Match the notches on the neckband to the shoulder seams and centre back. There is a bit of ease, the neckband is a bit smaller than the neckline for a better fit.